Brother 9340 Cdw Not Reading New Toner

Toner Yields

-    Starter toner cartridge (provided with new machines) has a yield of approximately one,000 pages (letter of the alphabet)

-    TN210BK standard toner cartridge has a yield of approximately two,200 pages (letter)

-    TN210C, TN210M, TN210Y standard toner cartridge has a yield of approximately 1,400 pages (alphabetic character)

The estimate toner yield is in accordance with the testing protocol called ISO/IEC 19798 (Letter).  The testing protocol involves, amid other things, continuous press of a 5% coverage sample page of text.  Users who typically print one or ii-page jobs or who typically impress documents with toner coverage college than v% should expect to receive a lower folio yield.

Actual folio count volition vary depending on your document type (standard letter, detailed graphics) and the number of pages printed per task.

The Replace Toner message:

The bulletin Replace Toner appears on the display if any one of the post-obit occurs:

-    The toner cartridge is at its terminate of life and needs to be replaced.

-    The programmer roller has reached its upper limit of rotations.

The message Replace Toner will non clear from the brandish if:

-    The replacement toner cartridge is not installed properly.

-    A starter toner cartridge is installed as a replacement toner cartridge.

-    A toner cartridge from some other auto or a used toner cartridge is installed as a replacement toner cartridge.

If the bulletin Supersede Toner continues to appear on the brandish after installing a replacement toner cartridge, answer the following questions:

A. Was the cartridge replaced and immediately afterwards replacing the cartridge, Supplant Toner continued to appear?  This means the Replace Toner bulletin NEVER cleared and NO pages were print later the new cartridge was installed considering the 'Replace Toner' bulletin remained on the display.

B. Was the cartridge replaced and cleared Replace Toner, but the message returned later on some usage of the new toner?  This means a new cartridge was installed and the Replace Toner message cleared.  So, after printing some pages, Supplant Toner re-appeared on the display.

If the answer is A, go to STEP ane .

If the answer is B, refer to the solution I recently installed the starter or a new toner cartridge and I don't think I got the total yield from the toner. What can I practice?

1. Ostend the color toner currently displayed on the LCD is the same color as the toner cartridge that was replaced.  Be sure to read the scrolling bulletin that appears after Supervene upon Toner.  The scrolling message specifies which color needs to be replaced.

-    If Aye, the color toner on the LCD is the same color toner that was merely replaced, go to STEP ii .

-    If NO, the color toner currently on the display is NOT the aforementioned equally the color toner that was replaced, a replacement toner for the color currently on the brandish must exist installed to clear the message.  It appears that subsequently the replacement toner cartridge was installed, a new message appeared for a different color.  After installing a new, out-of-the box Brother standard toner as a replacement, your event should be resolved.

2.  Was a NEW, out-of-the box, Brother STANDARD toner cartridge (TN210) installed as a replacement toner?

a.  The toner cartridges provided in the box with a new machine are NOT new STANDARD toners.  These are considered starter toners and the simply time they are to be installed and used is when the machine is first set upward.

b.  A toner cartridge from another machine or that was previously used is Not a NEW Standard toner.

c.  A toner that is refilled, remanufactured or that is a non-Brother toner is Non a new Brother Standard toner.

A brand new, out-of-the box standard Brother toner (TN210) should exist installed to clear the Replace Toner bulletin.  Do Non install a Starter toner or a previously installed or used toner cartridge as a replacement toner.  Our standard toner cartridges are manufactured with a reset lever that moves when installed into the machine and triggers a notification that a new cartridge has been inserted.  This mechanically triggers the auto to reset the Replace Toner message.

i. The Brother starter toner cartridges are not manufactured with the reset lever and will not clear the message.

ii.  A used or already installed toner cartridge does Not have the reset lever in the right position to trigger the machine to reset.  The toner reset lever was already shifted when initially installed into a auto and will not have the lever in the proper position if installed again.  This means the machine will not clear the Replace Toner message.

iii.  Considering a remanufactured, refilled or non-Brother toner is not manufactured past Blood brother, we cannot guarantee the operation of the toner or its ability to operate properly with our car.

-    If a brand new, out-of-the box Brother Standard toner cartridge was installed, get to Step three .

-    If a Starter toner cartridge, a used Brother toner or a not-Brother toner was installed, you lot should remove information technology and install a new, out-of-the box, Blood brother replacement toner cartridge, your issue should be resolved.

Brother strongly recommends that customers utilize only genuine Blood brother drum units and toner cartridges.  Each Brother laser printer is designed to piece of work at pre-set temperatures that are matched exactly to each of our individual toner formulations.  Each individual component is designed to work with the others to ensure quality and reliability.  Using non-Brother supplies may affect the hardware operation, print quality and machine reliability.  The Brother limited warranty does not apply to any trouble that is caused past the apply of tertiary-political party drum units, toner cartridges or toner.

iii. Do the following:

a. Fully open the meridian cover by lifting up on the handle (i).

b. Take out the color drum unit and toner cartridge associates that appears in the message.

Annotation: Place the drum and toner cartridge assembly on a clean, flat surface with a piece of disposable paper underneath in example the toner accidentally spills or scatters.

c.  Push button downwardly the green-labeled lock lever (one) and take the toner cartridge out of the drum unit.

NOTE: Handle the toner cartridge carefully.  If toner scatters on hands or clothing, immediately wipe information technology off or wash it with cold h2o.

d.  Gently rock the toner cartridge from side to side five or 6 times to evenly distribute the toner within the cartridge.  Redistributing the toner may articulate the message when the pulsate and toner assembly is reinstalled into the machine.

e. Reinstall the toner cartridge in the drum unit until yous hear information technology lock into place.

f.  Slide the pulsate unit and toner cartridge associates into the car.  Make sure you match the toner cartridge colour to the same color label on the automobile.

chiliad. Close the top comprehend.

If the problem continues and your machine is within warranty, you can locate a Blood brother Authorized Service Center (ASC) in your area by clicking on the link below:

http://world wide web.blood brother-united states of america.com/service/default.aspx  or contact Blood brother Customer Service by calling one-877-Brother (i-877-276-8437) Monday through Friday, excluding holidays.

If your machine is out of warranty, you can locate a Brother Authorized Service Eye using the information listed above.

williamsthemannind.blogspot.com

Source: https://help.brother-usa.com/app/answers/detail/a_id/70230/~/why-does-replace-toner-continue-to-appear-on-the-lcd-after-i-replaced-the

Share this post